中文 English

Set HomePage Favorite

INTL-SENSOR > Products > PCB 260A02

PCB 260A02

http://www.intl-sensor.com Time:2008/6/10 13:02:26 Count : 65 Times

PERFORMANCE

ENGLISH

Sensitivity(± 20 %)(z axis)

2.5 mV/lb

0.56 mV/N

[1][2]

Sensitivity(± 20 %)(x or y axis)

5 mV/lb

1.12 mV/N

[1][2]

Measurement Range(z axis)

1000 lb

4.45 kN

Measurement Range(x or y axis)

1000 lb

4.45 kN

Maximum Force(z axis)

1320 lb

5.87 kN

Maximum Force(x or y axis)

1000 lb

4.45 kN

Maximum Moment(z axis)

40 ft-lb

54.23 N-m

Maximum Moment(x or y axis)

70 ft-lb

94.91 N-m

Broadband Resolution(z axis)

0.006 lb-rms

0.027 N-rms

[3]

Broadband Resolution(x or y axis)

0.006 lb-rms

0.027 N-rms

[3]

Upper Frequency Limit

90 kHz

Low Frequency Response(-5 %)(z-axis)

0.01 Hz

Low Frequency Response(-5 %)(x or y axis)

0.001 Hz

Non-Linearity

≤ 1 % FS

[4]

Cross Talk(between x and y axis)

± 3 %

Cross Talk(between (x or y axis) and z axis)

± 5 %

ENVIRONMENTAL

Temperature Range

-65 to +250 °F

-54 to +121 °C

ELECTRICAL

Full Scale Output(Z Direction)

± 2.5 VDC

Full Scale Output(X and Y Direction)

± 5 VDC

Discharge Time Constant(z axis)

≥ 50 sec

Discharge Time Constant(x or y axis)

≥ 500 sec

Excitation Voltage(all channels)

20 to 30 VDC

Constant Current Excitation(all channels)

2 to 20 mA

Output Impedance

≤ 100 ohm

Output Bias Voltage

8 to 14 VDC

Output Polarity

Positive

PHYSICAL

Preload

10,000 lb

44.48 kN

[5]

Stiffness(z axis)

19 lb/µin

3.3 kN/µm

[3]

Stiffness(x or y axis)

6 lb/µin

1 kN/µm

[3]

Size (Height x Length x Width x Bolt Diameter x ID x Sensing Surface)

0.390 in x 1.35 in x 1.25 in x 0.512 in x 0.512 in x 0.920 in

9.90 mm x 34.3 mm x 31.8 mm x 13 mm x 13 mm x 23.37 mm

Weight

1.59 oz

45 gm

Housing Material

Stainless Steel

Sealing

Hermetic

Electrical Connector

4-Pin

Electrical Connection Position

Side

SUPPLIED ACCESSORIES:

Model 081A74 Pre-load bolt (for Models 260A02, 260A12, and 260A32) (1)

Model 082M12 Anti-friction washer (for Models 260A02, 260A12, and 260A32) (1)

Model 083A13 Pilot bushing (for Models 260A02, 260A12, and 260A32) (1)

OPTIONAL VERSIONS

M- Metric Mount

Supplied Accessory : Model M081A74 Mounting Stud (1) replaces Model 081A74

W- Water Resistant Cable

Electrical Connection Position

Side

All specifications are at room temperature unless otherwise specified.

NOTES:
[1]	Sensitivites are for listed preload. Sensitivites may vary ±5% depending on preload used.
[2]	Sensitivities are dependent upon supplied bolt.
[3]	Typical.
[4]	Zero-based, least-squares, straight line method.
[5]	Preload should be at least 10 times the X and Y operating range used.
[6]	See PCB Declaration of Conformance PS023 for details.

Keywords:

Triax ICP® force sensor, 1k lb (Fz), 1k lb (Fx,y), 2.5 mV/lb (z), 5 mV/lb (x, y)

Temperature Range: -65 to +250 °F (-54 to +121 °C)
Electrical Connector: 4-Pin

ProductsCompany

PCB Piezotronics was founded in 1967 as a manufacturer of piezoelectric quartz sensors, accelerometers,and associated electronics for the measurement of dynamic pressure, force, and vibration.The unique expertise of the company was the incorporation of microelectronic signal conditioning circuitry within these sensors to make them easier to use and more environmentally compatible.

Contact

Beijing Bron Science&Technology Commerce Co., Ltd.
Address：Room 512 of oriental Fortune,No.2 yard, North of the Anhua,Chongwen District，Beijing
Zip：100062
Tel：86 010-67114885/67124125/67152280
Fax：86 010-67124125
http://www.intl-sensor.com
E-mail:pcb@intl-sensor.com

Quick Navigation