ImageMainDescDownload

U.S. real-time analysis of sound level meter LDI		ANSI / IEC Type 1 sound level meter-1 / 3 octave real-time analysis or FFT analysis
Real-time filtering: 1 / 1 octave (16 hz to 16kHz) 1 / 3 octave (12.5 Hz to 20kHz) 400-FFT (1 Hz to 20 kHz) can be measured LEQ, SEL, Min, Max, Peak, the value A , C, Flat weighting
Detector mode: slow, fast pulse		ANSI / IEC Type 1 sound level meter-1 / 3 octave real-time analysis or FFT analysis
Real-time filtering: 1 / 1 octave (16 hz to 16kHz) 1 / 3 octave (12.5 Hz to 20kHz) 400-FFT (1 Hz to 20 kHz) can be measured LEQ, SEL, Min, Max, Peak, the value A , C, Flat weighting
Detector mode: slow, fast pulse

U.S. analysis of environmental noise sound level meter LDI		Dynamic range: 120 dB
Real-time analysis: 1 / 1, 1 / 3 octave record digital audio playback
Internal memory: 1 GB		Dynamic range: 120 dB
Real-time analysis: 1 / 1, 1 / 3 octave record digital audio playback
Internal memory: 1 GB

Magnetic sensors sense SEN-S65		Main features:
Low Power: 3 VDC when the current of less than 500 μ A
Small Size: 6.3 × 2.3 × 2.2mm
The scope of the magnetic field measurements: ± 1100 μ T (± 11Gauss)
High Resolution: 0.015 μ T (0.00015Gauss)
Very few external components: 11096 ASIC and two each sensor resistance

Parameters:
Coil voltage: 2.0V
Coil breakdown voltage: 200 V
Bear the greatest current: 50 A
Operating temperature: -55 ℃ ~ 140 ℃		Main features:
Low Power: 3 VDC when the current of less than 500 μ A
Small Size: 6.3 × 2.3 × 2.2mm
The scope of the magnetic field measurements: ± 1100 μ T (± 11Gauss)
High Resolution: 0.015 μ T (0.00015Gauss)
Very few external components: 11096 ASIC and two each sensor resistance

Parameters:
Coil voltage: 2.0V
Coil breakdown voltage: 200 V
Bear the greatest current: 50 A
Operating temperature: -55 ℃ ~ 140 ℃

LIPS 101 Stand Alone Linear Position Sensor 		Non-contacting inductive technology
to eliminate wear
Travel set to customer's requirement
Compact and self-contained
High durability and reliability
High accuracy and stability
Sealing to IP65/IP67 as required

Process Sense™ NDIR Analyzer		Fast response enables real-time chamber clean endpoint detection - lower Cost of Ownership,
Reduces chamber erosion from over cleaning - extending the life of the chamber,
Optimizing chamber clean time increases tool availability,
Reduced over-clean lowers particulate generation for improved yield,
Permanent calibration unaffected by process conditions,
Complete upgrade kits available for AMAT CVD tools.
count5 every page 15 1/1page   first page   prev page   next page   last page
login | Register | Member service | Service term | About us | Website guide | Service center      
INTL-SENSOR CopyRight
© Copyright By WWW.INTL-SENSOR.COM All Right
tel：86 010-67152280/67114885/67124125
E-mail:pcb@intl-sensor.com
京ICP备07000717号
京公网安备110101000113号